RP-QII & RP-QIII - stepper motor peristaltic pump - Pump head exchangeable
Flow rates from 0.06 µl/min up to 2600 µl/min
Description
RP-QII / QIII peristaltic pump version with stepper motor for precise control of a wide flow range.
The exchangeable pump head can be sterilized. For example:
- Models with silicone tubes can be autoclaved at 121°C for 25 minutes, 1 time.
- All of the standard models below are capable of gamma sterilization with 25 kGy.
Pump head replacement is a one-time disposable.
Specifications
Motor
|
stepper motor
|
Flow rate
|
0.06 - 60 µl/min | 0.18 - 180 µl/min | 0.35 - 350 µl/min | 1.1 - 1100 µl/min | 2.6 - 2600 µl/min
|
Channels
|
1
|
Operating pressure (max.)
|
500mbar
|
Tube materials
|
Pharmed® | Silicone
|
Tube sizes (ID x OD)
|
0.5 x 1.5 mm (Pharmed®) | 0.5 x 1.5 mm (Silicone) | 1.5 x 2.5 mm (Silicone)
|
Operating voltage
|
2,6 - 3,3 VDC
|
Dimensions
|
15 x 17 x 28 mm
|
Mounting direction
|
Any
|
Product overview
Product
|
Gear ratio
|
Voltage (DC V)
|
Flow rate (µL/min)
|
Tube material
|
ID x OD (mm)
|
|---|---|---|---|---|---|
RP-QIICP5S-P18A-DC3VS
|
1/50
|
2.6 - 3.3
|
0.18 - 180
|
Silicone
|
0.5 x 1.5
|
RP-QIIICP5S-P18A-DC3VS
|
1/50
|
2.6 - 3.3
|
0.18 - 180
|
Silicone
|
0.5 x 1.5
|
RP-QIIC1.5S-1P1A-DC3VS
|
1/50
|
2.6 - 3.3
|
1.1 - 1100
|
Silicone
|
1.5 x 2.5
|
RP-QIIIC1.5S-1P1A-DC3VS
|
1/50
|
2.6 - 3.3
|
1.1 - 1100
|
Silicone
|
1.5 x 2.5
|
RP-QIICP5F-P18A-DC3VS
|
1/50
|
2.6 - 3.3
|
0.18 - 180
|
Pharmed®
|
0.5 x 1.5
|
RP-QIIICP5F-P18A-DC3VS
|
1/50
|
2.6 - 3.3
|
0.18 - 180
|
Pharmed®
|
0.5 x 1.5
|
RP-QIIBP5S-P06A-DC3VS
|
1/150
|
2.6 - 3.3
|
0.06 - 60
|
Silicone
|
0.5 x 1.5
|
RP-QIIIBP5S-P06A-DC3VS
|
1/150
|
2.6 - 3.3
|
0.06 - 60
|
Silicone
|
0.5 x 1.5
|
RP-QIIB1.5S-P35A-DC3VS
|
1/150
|
2.6 - 3.3
|
0.35 - 350
|
Silicone
|
1.5 x 2.5
|
RP-QIIIB1.5S-P35A-DC3VS
|
1/150
|
2.6 - 3.3
|
0.35 - 350
|
Silicone
|
1.5 x 2.5
|
RP-QIIBP5F-P06A-DC3VS
|
1/150
|
2.6 - 3.3
|
0.06 - 60
|
Pharmed®
|
0.5 x 1.5
|
RP-QIIIBP5F-P06A-DC3VS
|
1/150
|
2.6 - 3.3
|
0.06 - 60
|
Pharmed®
|
0.5 x 1.5
|
RP-QIIB1.5R-P35A-DC3VS
|
1/150
|
2,6 - 3,3
|
0,35 - 350
|
FKM-70 (Fluorine rubber) |
1.5 x 2.5
|
RP-QIIIB1.5R-P35A-DC3VS
|
1/150
|
2,6 - 3,3
|
0,35 - 350
|
FKM-70 (Fluorine rubber) |
1.5 x 2.5
|
RP-QIIB1.5M-P35A-DC3VS
|
1/150
|
2,6 - 3,3
|
0,35 - 350
|
TM-50 (Olefin-based) |
1.5 x 2.5
|
RP-QIIIB1.5M-P35A-DC3VS
|
1/150
|
2,6 - 3,3
|
0,35 - 350
|
TM-50 (Olefin-based) |
1.5 x 2.5
|
RP-QIIF1.5S-2P6A-DC3.3VS
|
1/21.06
|
3,3
|
2.6 - 2600
|
Silicone
|
1,5 x 2,5
|
RP-QIIIF1.5S-2P6A-DC3.3VS
|
1/21.06
|
3,3
|
2.6 - 2600
|
Silicone
|
1,5 x 2,5
|
- The difference between RP-QIIxxxx and RP-QIIIxxxx is the presence or absence of holes to fix the pump. If the xxxx part is the same, other specifications are the same.
- FKM-70 tubes are fluororubber tubes with excellent chemical and oil resistance. They can also be used with special solvents. (In the case of special solvents, prior testing is required.)
- TM-50 is a tube made of an olefin-based material that has low sorption and is also used for cell culture applications.
- The RP-QIIF and QIIIF series, which use small diameter tubes, have a discharge volume of approximately 3.2μL per rotation. By stopping the rotation at a specified number using a controller, it is an ideal pump for dispensing a fixed amount of several tens of μL.
Dimensions
Ring Pump - peristaltic pump system
The single-ring principle of these peristaltic pumps enables, among other things, a miniature design and a very long service life of the tubes. Read more about this type of peristaltic pump and the advantages on our technical overview page.
Controller for Stepper Motor RingPumps
RE-C500/C501 Programmable Stepper Motor Controller RingPumps RP-HX, RP-TX, RP-QIIB/C & RP-QIIIB/C
A PC connected to the RE-C500 can control various pump operations.
Control 6 pumps with RE-C500 and up to 12 pumps by adding one RE-C501.
RE-C600 Programmable Stepper Motor Controller RingPumps RP-HX, RP-TX, RP-QIIB/C & RP-QIIIB/C
Various pump operation sequences can be programmed using a PC connected to the RE-C600.
Stepper motor driver board BD202411-Q
- This stepper motor driver is used to connect the motor and the power supply, and to control the motor via external control signals.
- A separate control device is required to send the control signals.
- A 24 V DC, 0.5 A power supply is needed.
