Precision peristaltic pump T100-WX10 - 2.5µl/min to 40ml/min

High precision, due to stepper motor control 0.1rpm to 100rpm

Description

Available in versions with control mode:

Dial switch and external signal (4-20 mA)
Dial switch and external signal (0-5 V)
Dial switch and external signal (0-10 V)
Dial switch and external signal (0-10 kHz)
RS485 communication

For tubing with 0.8-1.0mm wall thickness and up to 3.17mm inner diameter.

From 2.5 µl/min with 0.5 x 0.8 mm (ID x WT) tubing and 0.1 rpm.

Up to 40ml/min with 3.0 x 1.0mm (ID x WT) tubing and 100 rpm.

Pumphead with 4 rollers or for lower pulsation with 8 rollers.

Speed	≤ 100rpm
Speed resolution	0.1rpm
Max. flow rate	40mL/min
Rollers	4 \| 8
Tubing	ID ≤ 3.17mm, wall thickness 0.8mm - 1.0mm
*Direction control	Direction is controlled by external switch signal. CW when switch is open, CCW when switch is closed.
*Start/stop control	Start/stop is controlled by external switch signal. Pump runs when switch is open, stops when switch is closed.
*BCD dial switch speed control	The speed is divided into 15 grades. BCD position 1-F corresponding to (rpm) 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 (rpm)
*External speed control (optional)	4-20mA corresponding to 0.1-100rpm, 0-5V corresponding to 0-100rpm, 0-10V corresponding to 0-100rpm, 0-10kHz corresponding to 0-100rpm
**Communication pump ID	Pump ID range is 1-30
**Bit rate	1200bps or 9600bps
Dimension (L x W x H)	106 x 60 x 81 (mm)
Relative humidity	< 80%
Operating temperature	0°C - 40°C
Power supply	DC 11.4V - 25.2V
Power consumption	≤ 12W
Weight	0.51 kg
Note	Items with * are only available for products with dial switch and external speed control signal. Items with ** are only available for product with RS485.